Final Head Model

My final head model did not turn out as pleased and because I left myself with very little time to do it I would love to continue working on it and getting the mesh more correct after deadlines are over. Overall I am pretty happy with what I have made in the time I gave it, I know I could have achieved better if I had started earlier just time got away with me with other projects.
Screenshot 2016-05-10 02.50.22

It holds a slight resemblance to me and it holds a larger resemblance to a frog. If I were to work on this more I would work hard on the topology as it is quite condensed in areas and doesn’t run smooth with how it is meant to. the flow of the anatomy is wrong but it’s still in a basic format and I do wish to develop it.



Making the head

We are assigned to start modelling our own heads in maya, a task that I have put off for a long time because of how much I do not want to stare at my face for multiple hours and realise all of the flaws (but mainly because of poor time management). The first objective was to get reference photos. (check). Above are the photos that I used to model with. I began by aligning them up in maya by using planes within it to highlight each making line within the face so as the images would be lined up as best as possible.

The first thing I discovered was how much I look like a frog, it has been a running joke for a while that I am a merge of a frog or a giraffe. This project has allowed me to resolve the mystery as I have now established that I am of course of a froggy decent.

From this I then started to apply planes to the face and begin aligning verts with the features within my face. This started the main basis for my topology.

Screenshot 2016-05-04 16.13.42
I then began buildings the main components of the face with simple mesh. Aligning the vertices with the side profile and then taking it to front view to then edit so as I could start to get some features looking somewhat 3D.

From this I then began to build the face out a bit more and started to connect the main components together. This task was a new one to me, learning new ways to connect verts other that target welding (we merged them). Also I began learning how to fill holes and learnt what you don’t want in a good mesh. (I was silly about to keep taking screenshots of my face without the mesh, so it kind of defeats the purpose of showing it un-fortunately)

But at this stage the few people that had seen my model so far had said it already started to look like me. Which was kind of awesome to hear as I never thought I could model anything that could resemble my face as I didn’t even seem familiar to it myself after seeing the many of photos of it for this project.

(I began checking for any mistakes as things had started to get a exciting so I wanted to check before going any further)

Screenshot 2016-05-08 23.46.26

The mesh was pretty simple at this stage and that was a relief as I thought it had no smoothness to it in any way and my fave is a pretty round one. I tried to achieve as much as I could with a simple mesh and  then I just kept on working.

Screenshot 2016-05-09 00.15.23
Screenshot 2016-05-09 01.16.53

At this stage I was meant to start creasing certain parts of the geometry around the lips and eyes. But for some reason the mesh started to mess up in the eye overtime I did it, no matter where I creased on the model the eyes would go insane. I started to freak out things that the mesh was completely wrong and that I had random vertices attached to other ones creating weird things to happen. But all that it was, was the history needed deleted and the file needed to be reopened. This is what keep happening to the eye, when I tried to crease it. Other than that I didn’t run into too many other problems. But I probably didn’t give myself a big enough challenge.

When I mirrored the geometry over I found that my face was nearly 2cm wider on one side than the other. I had always knew it was larger on one side, but I never thought it was quite as much (which was quite hilarious to see). Anyway the was still a lot of work to be done at this stage.

Screenshot 2016-05-09 12.44.08

Foreheads are forever is something else I have learned while modelling my head. People say that you either have a four-head, a five-head or a six-head. But your fore-head goes the whole way round in this one, so it’s a fore-ever-head. Modelling the forehead was something I did find quite difficult though, and I’m not sure as to why. I think it is because the vertices need to be aligned so well that you can barely notice the movements as it  curves around the head.

Screenshot 2016-05-09 12.44.24Screenshot 2016-05-09 12.44.32

At this stage it is looking quite alien, and it’s only going to get more alien as it proceeds from the looks of things.

Making a sphere and aligning it to the mesh of the already existing facial features. This allows us to start merging the vertices and then deleting faces. after this you mould the head to fit a similar shape to yours. While doing this you have to keep in mine that the back of the skull begins to get wider. After you get the basis of this down you start to move the vertices so as they keep a constant rhythm going through the model.

Screenshot 2016-05-09 18.44.19Screenshot 2016-05-09 18.44.37

This is where I stop following one tutorial video and start searching for a good one of the ear. Once I found the ear tutorial I begins making the ear away from the head. I duplicate the side reference photo and then move is across so as to create a new work area.

I begin modelling the ear from a different tutorial and it’s not as scary as what I thought it was going to be. Within this video you basically extrude and add edge loops to get the basics of the ear made, then you play with the vertices to then start to form the movement and flow of the ear. Once you do that you form the depth.

Screenshot 2016-05-09 21.19.30Screenshot 2016-05-09 21.19.43

The ear was quite a fun and intricate bit to model. It was very hard to understand, but I enjoyed making it. I know I didn’t quite achieve the ear  I wanted but I worked with the time that I had. From this then came the difficult task of attaching the ear to the head model. This task freaked me out and I had tried to pre-plan it to the best of my abilities, but it still worried me as I know something bad was bound to happen. But the attaching of the ear did not go as bad as what was expecting and I found that the ear was quite easy to place and then align verts. When things go more difficult I was just able to add in edge loops to where I needed them and  then I moved some of them around to make it look more spread out and even.

Screenshot 2016-05-09 23.27.19

The ear was my favourite piece to model. From this I just had to start tweaking all the final bits, which I really did not have time for. I tried using the relax tool, but it moved the vertices in weird ways, so I worked with everything the best I could until finally I really had to submit. I’m happy enough with how it turned out. I was very scared of this task as every one freaked me out quite a bit from saying how difficult it was and from that I just kept putting it off with fear (which is a very stupid thing to do). But all in all, it’s not super difficult, you just need a lot of time for it and if I were to do it again I would give myself more time so as I would be-able to relax and enjoy modelling it.

Screenshot 2016-05-10 00.43.59

Final head, I wish I added a neck though….


Tutorial Videos I used

Finally I had found a simple enough tutorial that seemed to be an easy enough step by step video to follow, and also one that seemed possible to get finished in the time constraint that I had left my self to get it completed.

One major problem though with the tutorial that I had been using was that “James Taylor” did not include semi-detailed ears in the model he had created. Which I knew from before I had started using it, but I thought I had gave myself enough time to adapt a different ear in to the model I will had made by the “James Taylor” tutorial. The one below was the initial one I had checked out, and it didn’t seem that difficult to follow. One main reason that I didn’t use it in the end was the fact that guy talking in it tried to make it too entertaining and I couldn’t concentrate properly with this tutorial. I also noticed that with the finishing piece it seemed a little more difficult to connect to my already existing mesh so I then went on the search for a few more.

Another Ear tutorial I found to try and help the ear problem, which was quite interesting.

Finally My friend Eoin sent me the tutorial he was using and I used part 2 of his tutorial to then build the ear for my head model. After watching the video I really wish I had used it sooner and followed the entire 3 videos as they seem a lot more in-depth compared to the one that I had used to model my head, the video was also played in real-time and was a lot easier to keep up with rather than the one I had used. (and the guys voice was a lot more easier to listen to).



Module reflection

Imaging and data Visualisation has been an interesting module, it was a nice break from new narratives at times and it expanded your knowledge of different things. Such as, in the floating city project we had to do quite a lot of in-depth research and this was quite intense and something I wasn’t used to doing as reading loads and taking it all in isn’t quite my forte. But the challenge was there and from this you learnt how to research and then what ways you could possibly present it so as it’s in an easy format to understand. This is where the info-graphic came in. The floating city project also gave insight into how  research is quite necessary when coming into a large project. From this we then moved onto the head modelling and understanding topology. Honestly I wish I gave this section of the module a lot more time as I know I would have enjoyed it a lot more and researching for it would have been extremely interesting. The knowledge you gain from understanding how muscles affect the structure of the face is something extremely necessary for the years to come and I wasted my chance of learning that in the time scheduled. But I feel like I have grasped the basics and I am excited to start learning this more in summer.  This module has taught me a lot through-out the semester and I feel a lot more confident when it comes to tackling research and adapting the knowledge found there and then also when it comes to modelling and understanding good topology. I wish to continue learning this type of stuff over the summer for myself so as I can catch up to where I feel I am meant to be. I know I could have done a lot better in this module if I had gave it more time.

Floating city Kaunas-Final Presentation

Screenshot 2016-05-03 12.42.58

So the time finally came, our final presentation for the floating city project has been completed. It was quite intense and nerve wrecking, but I think it went well. Our tutor Conánn seemed to like it quite a bit, a few things he had to say about it was that the scale of some different parts could be adjusted as the sense of scale has been confused through the departments, the bottom bit looked crowded and condensed and then the top piece of the city looked a lot larger, each piece looked as though it would fit a different size of person. What he said to do to fix this was to add a few buildings from the bottom parts with all the houses and add little bits of them into the top of it!

All in all the presentation went quite well and if I have time I would like to go back with the team and fix a few things up within the city itself.

Look at the city float



So after I did an all nighter finishing off the modelling and texturing, my team came in and were super nice. They insisted I go home and get some rest and they’ll finish everything else off. But I ended up staying in all day till really late. Once I finally did leave they finished off the video and set up a batch render, then they edited the video to put in the statistics and they also put the sky into it. It was so nice to wake up to!!! They did an awesome job!